Wireless device – wireless and straightforward installation without any special cabling works.
Online monitoring – online 24/7 access to controlled parameters.
All in one – this type of sensor combines temperature and humidity detection in one device.
Long range communication – wireless communication range is up to 150m.
Long battery life – built-in battery provide 5+ years non stop wireless sensor operation.
Waterproof – dust and water protected cases with IP65 protection level for indoor and outdoor usage.
Parameters control range:-30℃ ..+55℃, 0..100% RH
Measurement accuracy :±0.5℃, ±3.5% RH
Measurement resolution :0.1℃, 0.1% RH
Battery type :Built-in Li-Ion non flammable IEC86-4 safety standard battery 400mAh non rechargeable
Battery life:5 years
Wireless temperature and humidity sensor SensMax SensGuard ENS210 designed for remote temperature and humidity monitoring within a range of -30°C to +55°C, and 0-100% RH. This temperature and humidity sensor has a waterproof casing for both indoor and outdoor usage.
Wireless temperature and humidity monitoring sensor SensMax SensGuard ENS210 designed for remote temperature and humidity monitoring within range of -30°C to +55°C and 0%-100% RH. SensGuard ENS210 wireless temperature and humidity sensor measurement accuracy are ±0.5℃ and 3.5% RH. The sensor reads temperature and humidity parameters every five minutes and transmits data to a data gateway via wireless data transfer protocol. Connectivity range is up to 150m. Wireless sensor has a waterproof casing with IP65 protection so you can use it both indoor and outdoor. You can setup allowed temperature, and humidity measurement range to receive notifications if controlled temperature and humidity parameters went outside of the defined range.
SensMax SensGuard ENS210 is wireless temperature and humidity sensor that collects environment statistics every 5 minutes. Temperature and humidity reading data goes to temperature and humidity gateway via a radio channel. The gateway accumulates temperature statistics from many wireless temperature and humidity sensors and forwards it to online reporting application for processing in various reports. Wireless temperature and humidity sensors SensGuard ENS210 have a built-in battery with lifetime 5+ years. Measurement accuracy is ±0.5℃ for temperature and 3.5%RH for humidity. There is an option to issue a compliance certificate from the accredited laboratory for each temperature and humidity sensor upon your request.
|Wireless temperature sensor SensGuard MCP9800|
|Parameters control range||-30℃ ..+55℃, 0..100% RH|
|Measurement accuracy||±0.5℃, ±3.5% RH|
|Measurement resolution||0.1℃, 01% RH|
|Measurement period||5 minutes|
|Battery type||Built-in Li-Ion non flammable IEC86-4 safety standard battery 400mAh non rechargeable|
|Battery life||5 years|
|Communication range||Up to 150m|
|Data signal encryption||AES128|
|Fixture||Double-sided adhesive tape or mounting bracket|